“Geometry and tool motion planning for curvature adapted CNC machining” by Barton, Bizzarri, Rist, Sliusarenko and Pottmann

  • ©Michael Barton, Michal Bizzarri, Florian Rist, Oleksii Sliusarenko, and Helmut Pottmann

Conference:


Type(s):


Title:

    Geometry and tool motion planning for curvature adapted CNC machining

Presenter(s)/Author(s):



Abstract:


    CNC machining is the leading subtractive manufacturing technology. Although it is in use since decades, it is far from fully solved and still a rich source for challenging problems in geometric computing. We demonstrate this at hand of 5-axis machining of freeform surfaces, where the degrees of freedom in selecting and moving the cutting tool allow one to adapt the tool motion optimally to the surface to be produced. We aim at a high-quality surface finish, thereby reducing the need for hard-to-control post-machining processes such as grinding and polishing. Our work is based on a careful geometric analysis of curvature-adapted machining via so-called second order line contact between tool and target surface. On the geometric side, this leads to a new continuous transition between “dual” classical results in surface theory concerning osculating circles of surface curves and osculating cones of tangentially circumscribed developable surfaces. Practically, it serves as an effective basis for tool motion planning. Unlike previous approaches to curvature-adapted machining, we solve locally optimal tool positioning and motion planning within a single optimization framework and achieve curvature adaptation even for convex surfaces. This is possible with a toroidal cutter that contains a negatively curved cutting area. The effectiveness of our approach is verified at hand of digital models, simulations and machined parts, including a comparison to results generated with commercial software.

References:


    1. Yusuf Altintas. 2012. Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design. Cambridge Univ. Press.Google ScholarCross Ref
    2. Xavier Beudaert, Sylvain Lavernhe, and Christophe Tournier. 2012. Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path. International Journal of Machine Tools and Manufacture 57 (2012), 73–82.Google ScholarCross Ref
    3. Wilhelm Blaschke and Kurt Leichtweiß. 1973. Elementare Differentialgeometrie. Springer, Berlin-New York. Fünfte vollständig neubearbeitete Auflage von K. Leichtweiß, Die Grundlehren der mathematischen Wissenschaften, Band 1.Google Scholar
    4. Amaia Calleja, Pengbo Bo, Haizea González, Michael Bartoň, and Luis Norberto López de Lacalle. 2018. Highly accurate 5-axis flank CNC machining with conical tools. The International Journal of Advanced Manufacturing Technology 97, 5 (2018), 1605–1615.Google ScholarCross Ref
    5. Francisco J. Campa, Luis Norberto López de Lacalle, Aitzol Lamikiz, and José Antonio Sanchez. 2007. Selection of cutting conditions for a stable milling of flexible parts with bull-nose end mills. Journal of Materials Processing Technology 191, 1 (2007), 279–282.Google ScholarCross Ref
    6. Li-Xin Cao, Hu Gong, and Jian Liu. 2007. The offset approach of machining free form surface: Part 2: Toroidal cutter in 5-axis NC machine tools. Journal of Materials Processing Technology 184, 1-3 (2007), 6–11.Google ScholarCross Ref
    7. Frederic Cazals and Marc Pouget. 2003. Estimating differential quantities using polynomial fitting of osculating jets. In Symp. Geometry processing, L. Kobbelt, P. Schröder, and H. Hoppe (Eds.). Eurographics, 177–178.Google Scholar
    8. Jung-Woo Chang, Wenping Wang, and Myung-Soo Kim. 2010. Efficient collision detection using a dual OBB-sphere bounding volume hierarchy. Computer-Aided Design 42, 1 (2010), 50–57.Google ScholarDigital Library
    9. Byoung K. Choi and Robert B. Jerard. 1998. Sculptured Surface Machining: Theory and Applications. Kluwer.Google Scholar
    10. Dawson-Haggerty et al. 2019. trimesh. https://trimsh.org/Google Scholar
    11. LN López De Lacalle, C Angulo, A Lamikiz, and JA Sanchez. 2006. Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling. Journal of Materials Processing Technology 172, 1 (2006), 11–15.Google ScholarCross Ref
    12. Simon Duenser, Roi Poranne, Bernhard Thomaszewski, and Stelian Coros. 2020. Robo-Cut: hot-wire cutting with robot-controlled flexible rods. ACM Transactions on Graphics (TOG) 39, 4 (2020), 98–1.Google ScholarDigital Library
    13. Serafettin Engin and Yusuf Altintas. 2001. Mechanics and dynamics of general milling cutters.: Part I: helical end mills. International Journal of Machine Tools and Manufacture 41, 15 (2001), 2195–2212.Google ScholarCross Ref
    14. Jianhua Fan and Alan Ball. 2014. Flat-end cutter orientation on a quadric in five-axis machining. Computer-Aided Design 53 (2014), 126–138.Google ScholarCross Ref
    15. Ramy Harik, Hu Gong, and Alain Bernard. 2013. 5-axis flank milling: A state-of-the-art review. Computer-Aided Design 45, 3 (2013), 796–808.Google ScholarDigital Library
    16. Bernard W Ikua, Hisataka Tanaka, Fumio Obata, and Satoshi Sakamoto. 2001. Prediction of cutting forces and machining error in ball end milling of curved surfaces-I theoretical analysis. Precision Engineering 25, 4 (2001), 266–273.Google ScholarCross Ref
    17. Alec Jacobson, Daniele Panozzo, et al. 2018. libigl: A simple C++ geometry processing library. https://libigl.github.io/.Google Scholar
    18. C. Greg Jensen and D. G. Anderson. 1993. Accurate tool placement and orientation for finish surface machining. J. Design and Manufacturing 3, 4 (1993), 251–261.Google Scholar
    19. C. Greg Jensen, W. Edward Red, and C. Ernst. 2008. Machining Free-Form Surface Cavities Using a Combination of Traditional and Non-Traditional Multi-Axis Machining Methods. Computer-Aided Design & Applications 5 (2008), 241–253.Google ScholarCross Ref
    20. C Greg Jensen, W Edward Red, and J Pi. 2002. Tool selection for five-axis curvature matched machining. Computer-Aided Design 34, 3 (2002), 251–266.Google ScholarCross Ref
    21. Yong-Joon Kim, Michael Bartoň, Gershon Elber, and Helmut Pottmann. 2015. Precise gouging-free tool orientations for 5-axis CNC machining. Computer-Aided Design 58 (2015), 220–229.Google ScholarDigital Library
    22. Diederik P Kingma and Jimmy Ba. 2014. Adam: A method for stochastic optimization. arXiv preprint arXiv:1412.6980 (2014).Google Scholar
    23. Ali Lasemi, Deyi Xue, and Peihua Gu. 2010. Recent development in CNC machining of freeform surfaces: A state-of-the-art review. Computer-Aided Design, 42, 7 (2010), 641–657.Google ScholarDigital Library
    24. S. X. Li and R. B. Jerard. 1994. 5-axis machining of sculptured surfaces with a flat-end cutter. Computer-Aided Design 26, 3 (1994), 165–178.Google ScholarCross Ref
    25. Jinesh Machchhar, Denys Plakhotnik, and Gershon Elber. 2017. Precise algebraic-based swept volumes for arbitrary free-form shaped tools towards multi-axis CNC machining verification. Computer-Aided Design 90 (2017), 48–58.Google ScholarDigital Library
    26. Ali Mahdavi-Amiri, Fenggen Yu, Haisen Zhao, Adriana Schulz, and Hao Zhang. 2020. VDAC: volume decompose-and-carve for subtractive manufacturing. ACM Transactions on Graphics (TOG) 39, 6 (2020), 1–15.Google ScholarDigital Library
    27. Gustav J. Olling, Byoung K. Choi, and Robert B. Jerard. 1999. Machining Impossible Shapes. Kluwer, Boston.Google Scholar
    28. Pierre-Yves Pechard, Christophe Tournier, Claire Lartigue, and Jean-Pierre Lugarini. 2009. Geometrical deviations versus smoothness in 5-axis high-speed flank milling. International Journal of Machine Tools and Manufacture 49 (2009), 453–461.Google ScholarCross Ref
    29. Davide Pellis, Hui Wang, Martin Kilian, Florian Rist, Helmut Pottmann, and Christian Müller. 2020. Principal symmetric meshes. ACM Trans. Graphics 39, 4 (2020), 127:1–127:17.Google ScholarDigital Library
    30. Helmut Pottmann and Johannes Wallner. 2001. Computational Line Geometry. Springer.Google Scholar
    31. Stephane Redon, Ming C Lin, Dinesh Manocha, and Young J Kim. 2005. Fast continuous collision detection for articulated models. Journal of Computing and Information Science in Engineering 5, 2 (2005), 126–137.Google ScholarCross Ref
    32. Alec Rivers, Ilan E Moyer, and Frédo Durand. 2012. Position-correcting tools for 2D digital fabrication. ACM Transactions on Graphics (TOG) 31, 4 (2012), 1–7.Google ScholarDigital Library
    33. David Roth, Sanjeev Bedi, Fathi Ismail, and Steven Mann. 2001. Surface swept by a toroidal cutter during 5-axis machining. Computer-Aided Design 33, 1 (2001), 57–63.Google ScholarCross Ref
    34. Knut Sorby, Kjell Tonnessen, Jan Erik Torjusen, and Finn Ola Rasch. 2000. Improving high speed flank milling operations in multi-axis machines. CIRP Annals-Manufacturing Technology 49, 1 (2000), 371–374.Google ScholarCross Ref
    35. Oded Stein, Eitan Grinspun, and Keenan Crane. 2018. Developability of Triangle Meshes. ACM Transactions on Graphics 37, 4 (2018), 1–14. Proc. SIGGRAPH.Google ScholarDigital Library
    36. Tran Duc Tang. 2014. Algorithms for collision detection and avoidance for five-axis NC machining: A state of the art review. Computer-Aided Design 51 (2014), 1–17.Google ScholarCross Ref
    37. Xiaochun Wang, S. K. Ghosh, Y .B. Li, and Xutang Wu. 1993a. Curvature catering – a new approach in manufacture of sculptured surfaces (Part 1. theorem). Journal of Materials Processing Technology 38, 1–2 (1993), 159–175.Google Scholar
    38. Xiaochun Wang, S. K. Ghosh, Y .B. Li, and Xutang Wu. 1993b. Curvature catering – a new approach in manufacture of sculptured surfaces (Part 2. methodology). Journal of Materials Processing Technology 38, 1–2 (1993), 177–193.Google Scholar
    39. Andrew Warkentin, Fathi Ismail, and Sanjeev Bedi. 2000. Comparison between multipoint and other 5-axis tool positioning strategies. Journal of Machine Tools & Manufacture 40 (2000), 185–208.Google ScholarCross Ref
    40. Joung-Hahn Yoon, Helmut Pottmann, and Yuan-Shin Lee. 2003. Locally optimal cutting positions for five-axis sculptured surface machining. Computer-Aided Design 35 (2003), 69–81.Google ScholarDigital Library
    41. Haisen Zhao, Hao Zhang, Shiqing Xin, Yuanmin Deng, Changhe Tu, Wenping Wang, Daniel Cohen-Or, and Baoquan Chen. 2018. DSCarver: Decompose-and-Spiral-Carve for Subtractive Manufacturing. ACM Transactions on Graphics (Special Issue of SIGGRAPH) 37, 4 (2018), Article No. 137.Google Scholar
    42. L. Zhu, G. Zheng, H. Ding, and Y. Xiong. 2010. Global optimization of tool path for five-axis flank milling with a conical cutter. Computer-Aided Design 42, 10 (2010), 903–910.Google ScholarDigital Library
    43. Qiang Zou, Juyong Zhang, Bailin Deng, and Jibin Zhao. 2014. Iso-level tool path planning for free-form surfaces. Computer-Aided Design 53 (2014), 117–125.Google ScholarCross Ref


ACM Digital Library Publication:



Overview Page: