“An asymptotic numerical method for inverse elastic shape design” by Chen, Zheng, Xu and Zhou

  • ©Xiang Anthony Chen, Changxi Zheng, Weiwei Xu, and Kun Zhou

Conference:


Type(s):


Title:

    An asymptotic numerical method for inverse elastic shape design

Session/Category Title:   Fabrication


Presenter(s)/Author(s):


Moderator(s):



Abstract:


    Inverse shape design for elastic objects greatly eases the design efforts by letting users focus on desired target shapes without thinking about elastic deformations. Solving this problem using classic iterative methods (e.g., Newton-Raphson methods), however, often suffers from slow convergence toward a desired solution. In this paper, we propose an asymptotic numerical method that exploits the underlying mathematical structure of specific nonlinear material models, and thus runs orders of magnitude faster than traditional Newton-type methods. We apply this method to compute rest shapes for elastic fabrication, where the rest shape of an elastic object is computed such that after physical fabrication the real object deforms into a desired shape. We illustrate the performance and robustness of our method through a series of elastic fabrication experiments.

References:


    1. Allgower, E. L., and Georg, K. 1990. Numerical continuation methods, vol. 13. Springer-Verlag Berlin. Google ScholarDigital Library
    2. Bächer, M., Bickel, B., James, D. L., and Pfister, H. 2012. Fabricating articulated characters from skinned meshes. ACM Trans. Graph. 31, 4, 47. Google ScholarDigital Library
    3. Barbič, J., da Silva, M., and Popović, J. 2009. Deformable object animation using reduced optimal control. ACM Trans. Graph. 28, 3, 53. Google ScholarDigital Library
    4. Barbič, J., Sin, F. S., and Schroeder, D., 2012. Vega FEM Library. http://www.jernejbarbic.com/vega.Google Scholar
    5. Barbič, J., Sin, F., and Grinspun, E. 2012. Interactive Editing of Deformable Simulations. ACM Trans. Graph. 31, 4, 70. Google ScholarDigital Library
    6. Bickel, B., Bächer, M., Otaduy, M. A., Lee, H. R., Pfister, H., Gross, M., and Matusik, W. 2010. Design and fabrication of materials with desired deformation behavior. ACM Trans. Graph. 29, 4, 63. Google ScholarDigital Library
    7. Bickel, B., Kaufmann, P., Skouras, M., Thomaszewski, B., Bradley, D., Beeler, T., Jackson, P., Marschner, S., Matusik, W., and Gross, M. 2012. Physical face cloning. ACM Trans. Graph. 31, 4, 118. Google ScholarDigital Library
    8. Bonet, J., and Wood, R. D. 1997. Nonlinear Continuum Mechanics for Finite Element Analysis. Cambridge University.Google Scholar
    9. Brent, R. P. 2013. Algorithms for minimization without derivatives. Courier Dover Publications.Google Scholar
    10. Calì, J., Calian, D. A., Amati, C., Kleinberger, R., Steed, A., Kautz, J., and Weyrich, T. 2012. 3d-printing of non-assembly, articulated models. ACM Trans. Graph. 31, 6, 130. Google ScholarDigital Library
    11. Ceylan, D., Li, W., Mitra, N. J., Agrawala, M., and Pauly, M. 2013. Designing and fabricating mechanical automata from mocap sequences. ACM Trans. Graph. 32, 6, 186. Google ScholarDigital Library
    12. Chen, D., Levin, D. I. W., Didyk, P., Sitthi-Amorn, P., and Matusik, W. 2013. Spec2fab: A reducer-tuner model for translating specifications to 3d prints. ACM Trans. Graph. 32, 4. Google ScholarDigital Library
    13. Cochelin, B. 1994. A path-following technique via an asymptotic-numerical method. Computers & structures 53, 5, 1181–1192.Google Scholar
    14. Coros, S., Martin, S., Thomaszewski, B., Schumacher, C., Sumner, R., and Gross, M. 2012. Deformable objects alive! ACM Trans. Graph. 31, 4, 69. Google ScholarDigital Library
    15. Coros, S., Thomaszewski, B., Noris, G., Sueda, S., Forberg, M., Sumner, R. W., Matusik, W., and Bickel, B. 2013. Computational design of mechanical characters. ACM Trans. Graph. 32, 4, 83. Google ScholarDigital Library
    16. Damil, N., and Potier-Ferry, M. 1990. A new method to compute perturbed bifurcations: Application to the buckling of imperfect elastic structures. International Journal of Engineering Science 28, 9, 943–957.Google ScholarCross Ref
    17. Derouet-Jourdan, A., Bertails-Descoubes, F., and Thollot, J. 2010. Stable inverse dynamic curves. ACM Trans. Graph. 29, 6, 137. Google ScholarDigital Library
    18. Derouet-Jourdan, A., Bertails-Descoubes, F., Daviet, G., and Thollot, J. 2013. Inverse dynamic hair modeling with frictional contact. ACM Trans. Graph. 32, 6, 159. Google ScholarDigital Library
    19. Hadap, S. 2006. Oriented strands: dynamics of stiff multi-body system. In Proceedings of SCA, 91–100. Google ScholarDigital Library
    20. Hildebrandt, K., Schulz, C., von Tycowicz, C., and Polthier, K. 2012. Interactive spacetime control of deformable objects. ACM Trans. Graph. 31, 4, 71. Google ScholarDigital Library
    21. Lazarus, A., Miller, J., and Reis, P. 2013. Continuation of equilibria and stability of slender elastic rods using an asymptotic numerical method. J. Mech. Phys. Solids 61, 8, 1712–1736.Google ScholarCross Ref
    22. Levenberg, K. 1944. A method for the solution of certain nonlinear problems in least squares. Quart. J. Appl. Maths. II, 2.Google Scholar
    23. Lourakis, M. I. A., Jul. 2004. levmar: Levenberg-marquardt nonlinear least squares algorithms in C/C++. {web page} http://www.ics.forth.gr/~lourakis/levmar.Google Scholar
    24. Martin, S., Thomaszewski, B., Grinspun, E., and Gross, M. 2011. Example-based elastic materials. ACM Trans. Graph. 30, 4, 72. Google ScholarDigital Library
    25. Miguel, E., Bradley, D., Thomaszewski, B., Bickel, B., Matusik, W., Otaduy, M. A., and Marschner, S. 2012. Data-driven estimation of cloth simulation models. Computer Graphics Forum 31, 2, 519–528. Google ScholarDigital Library
    26. Nealen, A., Müller, M., Keiser, R., Boxerman, E., and Carlson, M. 2006. Physically based deformable models in computer graphics. Computer Graphics Forum 25, 4, 809–836.Google ScholarCross Ref
    27. Ogden, R. W. 1997. Non-linear elastic deformations. Courier Dover Publications.Google Scholar
    28. Prévost, R., Whiting, E., Lefebvre, S., and Sorkine-Hornung, O. 2013. Make it stand: balancing shapes for 3d fabrication. ACM Trans. Graph. 32, 4, 81. Google ScholarDigital Library
    29. Skouras, M., Thomaszewski, B., Bickel, B., and Gross, M. 2012. Computational design of rubber balloons. Computer Graphics Forum 31, 2, 835–844. Google ScholarDigital Library
    30. Skouras, M., Thomaszewski, B., Coros, S., Bickel, B., and Gross, M. 2013. Computational design of actuated deformable characters. ACM Trans. Graph. 32, 4, 82. Google ScholarDigital Library
    31. Stava, O., Vanek, J., Benes, B., Carr, N., and Měch, R. 2012. Stress relief: Improving structural strength of 3d printable objects. ACM Trans. Graph. 31, 4, 48. Google ScholarDigital Library
    32. SunPe, P. Professional Rapid Prototyping & Manufacturing. http://www.sunpe.com/types-34.html, SunPe PROTOTYPE.Google Scholar
    33. Twigg, C. D., and Kačić-Alesić, Z. 2011. Optimization for sag-free simulations. In Proceedings of SCA, 225–236. Google ScholarDigital Library
    34. Umetani, N., Kaufman, D. M., Igarashi, T., and Grinspun, E. 2011. Sensitive couture for interactive garment modeling and editing. ACM Trans. Graph. 30, 4, 90. Google ScholarDigital Library
    35. Zahrouni, H., Cochelin, B., and Potier-Ferry, M. 1999. Computing finite rotations of shells by an asymptotic-numerical method. Comput. Methods Appl. Mech. Eng. 175, 1, 71–85.Google ScholarCross Ref


ACM Digital Library Publication:



Overview Page: